Shenyang Densen Environmental Machinery Co., Ltd
0086 186 4030 7886
Home | NEWS
Analysis on the daily maintenance of dry magnetic separator

Regarding the daily maintenance of the permanent magnet iron remover, we must pay attention to the following aspects

:1652066114291855 (1).jpg

 1. The axle bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life, which directly affects the service life of the machine and The operating rate requires that the injected lubricant must be clean and the seal must be good. 

2. The newly installed tires are prone to loosening and must be inspected frequently. 

3, pay attention to the work of all parts of the machine is normal. 

4, pay attention to check the wear level of wearable parts, pay attention to replace the worn parts at any time. 

5, put the underlying plane of the mobile device, should go out of dust and other things to avoid the machine encountered When the broken material is used, the movable bearing cannot move on the chassis, resulting in a serious accident. 

6. When the bearing oil temperature rises, the vehicle should be stopped immediately to check the cause. 

7. If there is impact sound when the rotating gear is running, it should be stopped and checked immediately and eliminated